Concrete patios and driveways are durable , but can be susceptible to oil stains. If yours become stained, your concrete contractor in Murfreesboro might recommend trying the cola trick. See a demonstration of this when you watch this featured video.
All you’ll need to clean your driveway’s surface is a new bottle of cola, a stiff-bristled scrub brush, and a bucket of water. First, give the cola bottle a few good shakes. Point the top at the oil stain and open the cap. Pour a generous amount of fizzy cola on the stain, and replace the cap. Scrub the concrete vigorously with the brush, and rinse with the water. If the stain is still there, repeat the process until it’s gone.
Homeowners who choose concrete driveways often do so because they are equally elegant and rugged. But it takes a while for the material to become hard and durable. As soon as the concrete contractor in Murfreesboro finishes installing the driveway, the curing process begins. During curing, the contractor must maintain the concrete at the ideal temperature and moisture level so that the driveway will develop its desired properties.
Why Curing Is Necessary
If concrete isn’t allowed to cure properly, it won’t have its maximum strength and durability. The curing process is central to concrete’s capacity to withstand the damaging effects of freezing and thawing. Curing also gives the material greater resistance to scaling and abrasion. If slabs aren’t cured, they will be prone to crazing. This is the development of hairline cracks.
How Long Concrete Takes to Cure
There are three phases to the concrete curing process. The initial phase is characterized by the settling of the concrete mixture. As this happens, “bleed water” rises to the surface and begins evaporating. The contractor will evaluate the rate of evaporation to determine if the bleed water is evaporating more quickly than it’s rising out of the mixture. If so, then it will be necessary to do some initial curing. The intermediate curing stage is when the contractor will perform the stamping, if required. This is followed by the final curing. The initial curing takes about seven days, and for at least the first three days, people and pets should avoid walking on the surface. The total curing process usually takes 28 days, during which time it should not be subjected to heavy equipment.
How Proper Curing Occurs
It’s commonly thought that concrete cures automatically, but it actually needs to be taken care of while the material sets and develops its strength. There are two primary methods used during the first week: Moist curing and membrane curing. Moist curing requires keeping water on the surface at all times, such as by using a sprinkler. The second method involves the use of a liquid membrane-forming compound, called a curing compound. The contractor can apply the curing compound to the surface. Once dry, the substance prevents evaporation.
Although Murfreesboro has moderate winters, concrete installers still exercise caution when sealing concrete. All concrete sealers have an MFT, which is the minimum film-forming temperature. This means that, if applied to a concrete driveway below this temperature, the sealer film won’t adhere properly. When this occurs, the surface develops delamination, white dusting, and white hazing. A general rule of thumb is to seal concrete only when the ambient air temperature and surface temperature are at least 50 degrees Fahrenheit. However, there are always exceptions.
Some concrete sealers use solvents that cure faster than others. This means that they are less likely to be adversely affected by cold temperatures. For example, water-based solvents are best used during the summertime, while acetone-based solvents are arguably the best ones to use during colder weather. Another consideration is the method of application. Concrete installers will usually spray on the sealer, rather than roll it on when the weather is chilly. Spraying sealer will allow for a more even, thinner coat that will cure more quickly.
Your foundation is one of the most critical parts of your home. If you develop issues like cracks or an uneven foundation, then cracked walls, uneven floorings, doors that won’t close, and structural problems with your home’s frame will follow. Having a concrete foundation slab near Murfreesboro can help prevent these issues, but there are still some steps you need to take to ensure that your foundation remains strong and viable for the life of your home. One of these important steps is taking action fast when plumbing problems develop.
Plumbing problems can be disastrous for your foundation. Water leaks will damage the foundation by changing the volume of the soil that surrounds it. First, water leaks can wash away soil, leaving parts of your foundation without support, leading to cracks and dropping. Water can also cause soil to expand. Over time, this puts excessive pressure on your foundation, causing cracks and faults. For these reasons, it’s important to protect your concrete foundation by having any necessary plumbing problems fixed quickly.
Often, the key to increasing your home’s value starts outside of your door. There are may changes you can make to your outdoor area that will increase your curb appeal and make your home more valuable, and many of those changes start with concrete. Concrete is a versatile and durable material that can be used in countless ways to boost the exterior appeal of your home. Here is a look at some of the ways you can use concrete in Murfreesboro to boost your home’s value.
Concrete driveways offer a smooth surface and the ability to add colors and patterns into your driveway design. Concrete is a major upgrade from gravel, and it is also superior to asphalt. Asphalt driveways can look aesthetically pleasing, but they require maintenance to stay in good condition. Asphalt needs to be periodically sealed, or it will begin to crack. Even with careful maintenance, asphalt will fail before concrete. Concrete driveways look great, don’t need any kind of maintenance, and will last for over 30 years.
Increasing your usable outdoor space is a proven way to increase your property value. With a concrete patio, you get added livable space that is both durable and low-maintenance. Concrete is easily adapted to match your color and shape preferences, so that your patio will blend seamlessly into your existing aesthetic. Concrete patios last for decades and are ideal for creating everything from a small gazebo space to large outdoor kitchens.
Concrete is the perfect material to use to create a walkway for your home. Design a path that leads from your driveway to your front door or from the street up to your porch. Walkways are also ideal for making paths from your home across your yard to a pool or other outdoor sitting area. Walkways can be designed in a multitude of colors and can incorporate decorative patterns to boost their appeal for your property.
Although the weather is generally mild in Murfreesboro, when the days get cool, there are some special steps your concrete company must take to ensure that you get the best possible results. Here are the facts you need to know about concrete pouring in cold weather conditions.
Defining Cold Weather
As a strong, durable material, concrete can stand up to extreme weather conditions for decades, but when it is being poured and before it is cured, cold weather can interfere with the installation process. As a general rule, temperatures of 40 degrees F or below can be problematic for concrete. For the Tennessee region, these temperatures are typically limited to a small window of time between December and March. Long-term freezing temperatures are rare. Your concrete company will follow the weather forecast closely to ensure that they take the appropriate steps if your installation will occur on a cold-weather day.
If the ground is frozen, your concrete company may wait to pour the concrete until it has warmed. The ground must also be free of ice and snow. If concrete is poured onto frozen ground, it will settle and crack as the ground thaws. The top could also set while the bottom does not. In some cases, ground heaters can be used to thaw frozen ground. Any tools used to work on the concrete itself must also be warmed so that they are above freezing. Keep in mind that you shouldn’t apply deicing agents to any ground that is going to be treated with concrete.
If temperatures are going to reach 40 degrees F or below at any time during the concrete installation process, your concrete company will follow cold weather curing procedures. Typically, solvent-based curing products or cure-and-seal chemicals should be used to prevent freezing in the concrete before it is set. One challenge of winter weather in the Tennessee region is that the ground typically goes through freeze-and-thaw cycles daily, with cold nights and warmer days. Your concrete company may use tenting or heat retention blankets to protect the concrete during curing for this reason.
A new gazebo might be just what your backyard needs: it blocks out the sun so you can hang out outside without being burnt, and it adds a fresh visual element to your landscape. It invites you to eat family dinners in the backyard during the nice weather, and can really tie together your design. Your gazebo might need some help staying upright, however, which means it needs a solid foundation. A concrete foundation in Murfreesboro will prevent your gazebo from sinking into your lawn, so it’ll look and work great over the years. Keep reading if you’re wondering if you should have a foundation slab for your new gazebo.
Anything that’s going to stand up over time needs a good foundation to stand on. Concrete foundation slabs are a great choice because they’re durable and afford different design options. A sturdy foundation ensures that you get the most out of your investment, but it’s your job to take care of it. Make sure you have a proper drainage system set up so water doesn’t pool on your foundation and cause it to crack or settle. Also, consider root barriers if you have large trees in your yard that might grow into your foundation.
At Cantrell’s Concrete , we are thrilled to provide our satisfied customers with top rated driveway and foundation services in Murfreesboro. When you watch this video, you will see some actual reviews from happy customers who have used our concrete services. By working with our team of concrete foundation professionals, you can rest assured that you will be completely satisfied with the results of your project.
If you would like to become our next satisfied customer, be sure to get contact our driveway and foundation installation specialists to receive a free quote. Whether you are in need of emergency foundation service, or you are planning on installing a new concrete driveway for your property, our team will be thrilled to assist you.
When you are in need of high-quality concrete or foundation service in Murfreesboro, look no further than Cantrell’s Concrete. For more than 2 decades, we have provided our customers throughout the Murfreesboro area with top rated concrete services that are backed by an unparalleled warranty program. By hiring us to create your driveway or foundation slab , you will have the peace of mind that comes from knowing that our team is committed to excellence.
To showcase our unbeatable commitment to high-quality concrete services, we back all of our projects with a 1-year warranty. Unlike many contractors, who do not offer warranties for their concrete projects, we are happy to provide a comprehensive warranty program for our customers. Before we sign off on your job, we will check to make sure that your concrete project has been completed to perfection. Visit our website to learn more about what you can expect from our concrete services.
Concrete is a material that is commonly used for creating sidewalks, patios, and foundations. While you may be familiar with the presence of concrete throughout your daily life, there are some facts about this material that may surprise you. A concrete contractor that offers concrete slabs in Murfreesboro can provide you with the information that you will need to make an informed decision about the materials and methods that are used to create your new concrete foundation.
When you are learning about the composition and properties of concrete, it is important to understand that concrete is actually a mixture of several different materials. In order to create concrete, a contractor must blend a precise mixture of aggregate, water, and Portland cement. The ratio of these three materials will affect the final density and durability of the concrete after it has dried. After your concrete has determined the ideal concrete mixture for your specific project, he will calculate the total volume of materials that will be needed to pour your concrete slab.
- patio installation
- Concrete patios
- concrete foundation
- Foundation Slabs
- backhoe rental
- Concrete Contractor
- Concrete Tips
- concrete driveways
- About Us
- Foundation Problems
- Foundation Services
- Home Foundation Damage
- Concrete Slab Foundation
- Driveway Design
- Uneven Foundation
- Deck Footing
- Home Foundations
- Patio Design
- Sidewalk Installation
- Home Foundation Repair
- Create Walkway